Tips and Techniques
Below is the recommended technique for fine-tuning the amount of adhesion between the printed objects and the build plate -- the adhesion is easily controll...
Thu, 28 Jan, 2016 at 10:25 AM
Below is the recommended technique for removing printed objects from the build plate.
First, always loosen the finished print, before attempting ...
Thu, 28 Jan, 2016 at 10:28 AM
The file attached is an STL for the DeltaMaker 5lb (2.2kg) spool holder.
Thu, 11 Jun, 2020 at 3:32 PM