Network Configuration Options

The DeltaMaker is accessed via Wi-Fi or Ethernet (or both). Out of the box, the DeltaMaker will create it's on Wi-Fi network that you may connect to. Many other options are possible.

Standard Configuration
The DeltaMaker is pre-configured with the following networking options.  Either of these options may be immediately used, without any additional ...
Thu, 27 Oct, 2016 at 5:39 AM
Joining a Wi-Fi Network
If your home or office already has a Wi-Fi network, we recommend that you add your DeltaMaker to that network, rather than have the printer create it's...
Sun, 23 Aug, 2015 at 7:46 PM
Ethernet Static Address
This procedure is for users who require the use of a static IP address on their Ethernet network. Currently, this procedure involves logging-in to the D...
Thu, 6 Sep, 2018 at 12:57 PM
Disabling the WiFi Interface
This procedure is for users who require the WiFi interface to be disabled.  After doing so, the DeltaMaker will only be accessible via the Ethernet network....
Wed, 21 Jun, 2017 at 5:05 PM
DeltaMaker Direct Ethernet Connection on Windows
In order to utilize the DeltaMaker connected directly to your computer's ethernet connection under Windows 7/8/8.1/10 you will need to enable "Int...
Tue, 28 Aug, 2018 at 1:45 PM